Software required to deploy a FIBRE island

Software Recommended version Machine Specs SO Importance
Xen Xen 4.9.2 Physical Machine:
2x Intel Xeon E5-2630 (2.3GHz,15M)
64GB Memory (8x 8GB)
4x Hard Disk 1TB SATA
At least 03 Network Interfaces 1Gbps
Ubuntu 18.04 LTS Mandatory
OMF OMF aggregate 6.0 Virtual Machine:
2GB Memory
Hard Disk 10GB
1 VCPU
3x Virtual network Interface
Ubuntu 16.04 LTS Mandatory
Flowvisor flowvisor 0.8.17-3 Virtual Machine:
4GB Memory
Hard Disk 4GB
1 VCPU
1 Virtual network Interface
Debian Wheezy (7.0) Mandatory
VPN Openvpn 2.2.1 Virtual Machine:
2GB Memory
Hard Disk 4GB
1 VCPU
4x Virtual network Interface
Debian Wheezy (7.0) Optional – Depends on the capability to connect directly to the FIBREnet
Zabbix Proxy Zabbix-Proxy 3.0-1 Virtual Machine:
2GB Memory
Hard Disk 10GB
1 VCPU
1 Virtual network Interface
Debian Jessie (8.4) Mandatory

Deprecated software

Software Recommended version Machine Specs SO Importance
Xen Xen 4.1.4 Physical Machine:
2x Intel Xeon E5-2630 (2.3GHz,15M)
64GB Memory (8x 8GB)
4x Hard Disk 1TB SATA
n Network Interfaces 1Gbps (where n = number of OpenFlow Switches + 1)
Debian Wheezy (7.0) – 64bit Mandatory
LDAP ldap 2.4.31 Virtual Machine:
1GB Memory
Hard Disk 4GB
1 VCPU
1 Virtual network Interface
Debian Wheezy (7.0) – 64bit Mandatory
OCF OCF v.0.8.1 Virtual Machine:
2GB Memory
Hard Disk 4GB
1 VCPU
1 Virtual network Interface
Debian Squeeze (6.0) – 64bit Mandatory
OMF OMF aggregate 5.4 Virtual Machine:
2GB Memory
Hard Disk 10GB
1 VCPU
3x Virtual network Interface
Ubuntu 12.04.3 LTS – 64bits Optional – Required only to islands with wireless nodes
perfSONAR perfSONAR 3.3.1 Physical machine:
Intel® Xeon® Quad-Core E3-1270V2 (3.50GHz, 8M Cache)
16GB Memory (2x8GB) 1600Mhz
2x Hard Disk 1TB SATA
CentOS 6.4 (PerfSONAR distro) Optional
ZenOSS ZenOSS 4.2.5
Bind 9.8.2
Virtual Machine:
8GB Memory
Hard Disk 30GB
1 VCPU
1 Virtual network Interface
CentOS 6.5 replaced by Zabbix (see below)